Dynamic Electricity

The SI unit of electric current is ...

The unit of electrical resistance is ...

The instrument used to measure electric current in a circuit is ...

The instrument used to measure electric voltage is ...

Ohm's law states that electric current is proportional to the ...

The conventional direction of electric current is from the ... terminal to the ... terminal.

A 20-ohm resistor is given a voltage of 10 volts. The current flowing through it is ...

A current of 2 A flows through a 6-ohm resistor. The voltage across the resistor is ...

A voltage of 12 V produces a current of 3 A in a resistor. The resistance of the resistor is ...

Three resistors of 2 ohms, 3 ohms, and 5 ohms are connected in series. Their total resistance is ...

Two resistors of 6 ohms and 3 ohms are connected in parallel. Their total resistance is ...

The electrical energy used by a device of power P over a time t is given by ...

An electrical device of 100 W runs for 5 hours. The electrical energy used is ...

The resistance of a conducting wire depends on ...

Two resistors of 4 ohms and 6 ohms are connected in series to a 20 V source. The current flowing is ...

Resistors of 4 ohms and 6 ohms are connected in parallel to a 12 V source. The total current in the circuit is ...

Two resistors R1 = 2 ohms and R2 = 4 ohms are connected in parallel. If the total current is 6 A, the current through R2 is ...

A house uses four 20 W lamps for 5 hours and one 100 W television for 4 hours each day. The total electrical energy per day is ...

Four identical resistors of 8 ohms each are connected in parallel. Their total resistance is ...

Two identical lamps are connected in series, then in parallel to the same voltage source. The correct statement is ...